BT-750 Operator Manual 47
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
Chapter 10
Measurement of IBP
10.1 IBP Measurement
Arterial Blood Pressure is the pressure exerted by the blood against the walls of the arterial
vessels. The cardiac cycle consists of a period of relaxation called Diastole, during which
the heart fills with blood, followed by a period of contraction called Systole. While the heart
is contracting and relaxing, the sensor gets the measurement of the pressure.
10.2 Setup Connections
1)
Connect the interface cable for the transducer to the IBP connector on the monitor’s front
panel. An interface cable for the transducer has to be selected correctly as it depends on
the each transducer type.
Note
The monitor is designed to accept signals from BT4812-3 disposable
transducer, or equivalent (pressure range of 0~300 mmHg). Refer to
the transducer directions for use for details.
*This transducer is verified under the connection with to see if
protective means is provided against hazards to patient when used
with HF surgical equipment.
IBP Connector
