BT-750 Operator Manual 24
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
5.2 The modification of system setup (2
nd
display window)
On operating the service mode such as CHANNEL SET, Date /Time, Printer setup, additional
active window is opened.
5.2.1 Selection of CHANNEL
1) Go to the required location with trim knob and select the location, then the display
window becomes active.
2) Set up the values, turning the trim knob to the right / left and save the values after
pressing the trim knob.
3) Press “ok” button to revert to the main display window
4) On selection of ‘exit”, it turns to 1
st
display window.
5) Press “
” button to revert to the main display window.
Setup
Mode
Range of Change
Description
DISPLAY
3~6 waveforms
Input the number of
channels for waveform
display
Selection of
waveform
Selection of
location
1CH : ECG 1 (fixed)
2CH : ECG2, PELTH, BP1, BP2 (4)
3CH : PELTH, BP1, BP2, RR, CAPNO (5)
4CH : PELTH, BP1, BP2, RR, CAPNO, --- (6)
5CH : PELTH, BP1, BP2, RR, CAPNO, --- (6)
6CH : PELTH, BP1, BP2, RR, CAPNO, --- (6)
Set up the location at
each waveform
Color at
each
waveform
8
Set up the color at each
waveform.
5.2.2 Setup date /time
1) Go to the required location with trim knob and select the location, then the display
window becomes active.
2) Set up the values, turning the trim knob to the right / left and save the values after
pressing the trim knob.
3) Press “RETURN” button to go to 1
st
display window.
