BT-750 Operator Manual 54
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
Caution
When harmful (unaccepted) materials are used for cleaning, we shall not
offer the service without charge in regardless of warranty period.
Check carefully both monitor and probe after cleaning the equipment.
Do not use the equipment that is worn out or damaged.
Caution
You can get incorrect measurement figure under the following conditions.
- The patients’ excessive motion
- Using electrical operational instrument with high-frequency or the
instrument for cardioversion.
- Venous blood pulse
- Appling to the monitor parts to measure blood pressure or use arterial
catheter/bandage and intravascular parts
- When the patients are on low blood pressure, severe blood vessel
contract, sever anemia or low body temperature.
- Arterial occlusion nearby probes
- When the patients are on cardiac arrest or shock.
Premature neonates and patients with chronic pulmonary disease should
be checked for oxygenation levels before starting treatment.
To prevent electric noise during use, the product should be installed
apart from dynamo, X-ray equipment, broadcast equipment or portable
cables. An inaccurate result may occur when these equipment are placed
near the product.
To ensure patient is electrically isolated, connect only to other
equipment that provides patient electrical isolation. When the patient
with pacemaker use the monitor, only qualified personnel should
operate and control all functions of the monitor.
