---------------------------------------------------------------------------------------------------------------------------------------
Rev. 3.0
42
BM3 User’s Manual
analyzed and evaluated before the device is connected to the network or the network is changed,
and appropriate action must be taken.
Subsequent changes to the network example:
Network configuration change
Removing a device from the network
Adding new devices to the network
Upgrading or updating devices connected to the network
Warning
Recommendations for wireless connections
BM3 has a change in the number of equipment connections depending on wireless AP
(Access Point) performance.
When using a general AP, it is recommended to connect 8 units to the same network.
Due to the nature of wireless, connectivity may not be good depending on the
environment
Remote View
If the monitor is connected to a network, you can view other monitors connected to the network
on your monitor and make the alarm silent. The procedure for displaying the remote view screen
is as follows. To set the menu display time, refer to the setting page below.
NOTE: The Print Screen Sticky key on the front panel of the monitor allows you to print the
remote view screen as it appears on your local monitor.
The menu below is a setup menu for retrieving data from other patient monitoring devices
connected to the same network. To view the menu settings, touch the My BED number box in the
top menu bar.
