---------------------------------------------------------------------------------------------------------------------------------------
Rev. 3.0
25
BM3 User’s Manual
Power
The BM3 monitor uses a DC adapter (100-240 VAC / 18VDC 2.8A). In the event of a
power outage or cable shortage, the monitor automatically switches to battery power to
continue patient monitoring without data loss. The built-in battery is intended for back-
up use only during power-off.
DC Product information
Manufacture:
BRIDGEPOWER CORP.
Model name:
BPM050S18F02
Input Power:
100~240V 1.2A
Output Power:
18 V, 2.8 A
DC Power LED is lighted on when the DC Power is plugged into the inlet at the back of
the product. A press of power key makes the machine ready for use.
Caution
This equipment must be connected to a protective earth grounded power supply.
Using non-standard products other than the adapters supplied by us may cause
signal distortion or noise. Be sure to use a genuine adapter that is supplied by our
company and is insulated.
Battery power
DC adapter, it uses battery power when power failure and portable use.
The battery is attached to the bottom of the equipment and the additional extended
battery is connected to the left side.
Battery: 031PpTC(3ICR19/65) (10.8V - 2150mA, Li-ion)
The Lithium-Ion battery is a rechargeable battery containing Lithium-Ion cells. Each
battery contains an integrated electronic fuel gauge and a safety protection circuit.
