---------------------------------------------------------------------------------------------------------------------------------------
Rev. 3.0
113
BM3 User’s Manual
Connecting the LoFlo Sample Kit
1. The sample cell of the sampling kit must be inserted into the sample cell receptacle of the
LoFlo CO
2
Module as shown in Figure 1. A “click” will be heard when the sample cell is properly
inserted.
2. Inserting the sample cell into the receptacle automatically starts the sampling pump.
Removal of the sample cell turns the sample pump off.
3. To remove the sampling kit sample cell from the sample cell receptacle, press down on the
locking tab and pull the sample cell from the sample cell receptacle.
