manualshive.com logo in svg

Biocontrol CL-10 Plus, Руководство пользователя

Поделиться
Скачать
Biocontrol CL-10 Plus Скачать руководство пользователя страница 53

 
 

 

 

 

 
CL-10 Plus – User Manual 

53 / 75 

ECPUS vers 0.2 eng 

 

 

4.6.4 Calibrate 

Temperature. 

 

This command is only used by  technical personnel.  
CL-10 Plus contains in the hardware all information for the right temperature during the 
working session. 
 
To check that this setting is not idle: 
From 

Explorer

 Enter CL10 folder and open the text file (.txt): C:\cl10\cl10.ini: 

 

cl10.ini

 

 
Under the Header [

OPERATIONS

], verify that TemperatureOffset = 0. Digit zero if a 

different value is displayed. From 

File

 menu select 

Save

 and close the window. 

 
Once this is made, it is possible to change the PC without affecting the temperature offset; 
in fact this parameter remains completely independent from the PC used and it remains 
stored in the instrument hardware.  

 

4.6.5  

Communication parameters.  

This window is used if it is required to configure and select the serial port (RS 232) used 
by CL10 Plus. 
The preferential channel is COM1, the alternative one is COM2, in case COM 1 is 
engaged in other jobs. COM3 and COM4 are not enabled. 
Concerning Baud Rate (9600), Data bits (8 bit), Stop bits (1 stop), Parity (None), the 
respective values must be as described in the picture; in any case the same as the 
interface values used by the PC. 
 

 

4.6.6  

Print Technical Report.  

This command is used when required to check the instrument performance of a working 
session. The function is only used by technical personnel from , unless the CL-10 operator 
is addressed to cooperate. 
The printing procedure is the same as 

Print

 

Worklist

 command (see § 4.5.1); although the 

printout has a different structure and a number of additional information (D1, D2, 

∆

mpH) 

compared to 

Print Worklist

, allowing technical specialised personnel to detect possible 

causes of faults. 
 

Содержание CL-10 Plus












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды