U
SER
’
S
AND
I
NSTALLER
’
S
M
ANUAL
I
NTRODUCTION
Version: 4.0 (23-08-2007)
9
1.3.4 Type plate
The type plate can be found on the top of the unit.
This manual refers to the following data on the type plate:
•
Type
: full
type code
of the unit;
•
Code
:
unit code
of the electronic controller;
•
M
: weight of the unit;
•
P
max
: maximum permissible operating pressure in the hot
water circuit (at 110 ºC);
•
U
,
I
max
,
P
motor
and
P
heating
: maximum load on the electrical
system by the unit.
1.3.5 Components and accessories
Note:
n
The type code of components and accessories must corre-
spond to that of the unit to which they will be applied.
Components
The following components are delivered separately but always
required:
•
control panel (able to control a maximum of 10 units);
•
Biddle control cable, available in various lengths;
•
only with free-hanging models:
set of end panels.
Accessories
The following accessories are available as options:
•
door contact switch;
•
wall bracket set, ‘Standard’ or ‘Design’;
•
threaded rod lining;
•
long-life filter (instead of the standard inlet grates and/or
grilles);
•
BMS interface module (instead of control panel).
Type CA M-150-W-F
Code 1213
U 230 V 1N~ 50 Hz
Biddle bv
Markowei 4
NL-9288 HA Kootstertille
Nº 5426/1-1 00-01
I
max
L1 2.4 A
I
max
L2 -
M 60 kg
I
max
L3 -
Medium LPHW
P
motor
0.56 kW
p
max
1400 kPa
P
heating
-
Example of a type plate