U
SER
’
S
AND
I
NSTALLER
’
S
M
ANUAL
S
ETTINGS
Version: 4.0 (23-08-2007)
39
Release delay
On release of the signal, you can make the effect of an input
signal continue for some time (
release delay
). You set the
length of the delay using function no. 76 at the installer’s level
(see section
4.3.2
).
The release delay works only in the unit input.
Multiple units operated from one single control panel
In general, the unit input has a
global
effect: one signal to one
unit has the same effect in all units connected to the control
panel. This does not apply for values 1 and 51 in function no.
60 (see there).
The control panel input has always a global effect.
4.5.3 Control panel input settings and options
O
PTIONS
F
UNCTION
NO
. 52
W
ORKING
OF
THE
INPUT
NORMALLY
OPEN
NORMALLY
CLOSED
EFFECT
ON
INCOMING
SIGNAL
EFFECT
ON
RELEASED
SIGNAL
0
(default
value)
-
The air curtain is or continues to
be switched On. You can switch it
Off using the
key.
The air curtain is or continues to
be switched Off. You can switch it
On using the
key.
1
-
The air curtain is always switched
On.
The air curtain is always switched
Off.
The display reads
.
The
key does not work (even in pause mode).
•
Normally open
: The signal comes in when the contact is closed.
•
Normally closed
: The signal comes in when the contact is broken.