Biddle CA M-150-W-F Скачать руководство пользователя страница 34

Страница: 34 / 60

ETTINGS

OMFORT

URTAIN

4.2.3 Functions at the manager’s level

UNCTION

PTIONS

OUR

SETTING

Automatic temperature control or

fixed temperature for the air curtain

See also section

3.2

AU = automatic temperature control

(default value)

30, 35 or 40 °C = fixed temperature

HI = maximum discharge air temperature

With hot-water heating, the maximum

is 55 °C, with electric heating 50 °C.

Reading or resetting service life of

filter

Use this function when replacing or

cleaning the filter, see section

5.1

The service life is expressed in weeks.

Resetting after replacing or cleaning:

• press

and

simultaneously

You return to the user’s level immediately.

Maximum filter life

(service life, on expiry of which filter

is considered dirty)

See also section

5.1

Pre-settable between 1 and 52 weeks.

(default value = 26 weeks)

Enable/disable filter service life

tracking and displaying

See also section

3.4.1

0 = disable tracking and displaying

1 = enable tracking and displaying (default

value)

Room temperature control set point

See also section

4.4

Pre-settable between 15 and 30 °C

(default value = 25 ºC)

Adjusting control panel temperature

reading

Use this function if the displayed room

temperature differs from the actual

temperature due to unfavourable

position of the control panel.

Pre-settable between -3 and +3 °C

(default value = 0 ºC (no adjustment))

Reading or deleting current faults

See also section

6.3

Browsing and reading list:

• press

Deleting faults:

• press

and

simultaneously

You return to the user’s level immediately.

Default settings at the manager’s level

dF = all functions have default values

-- = there are functions with deviating

values

To default all values:

• press

and

simultaneously

• press

for 3 seconds

Function nos. 2 and 10 are not affected.

Содержание CA M-150-W-F





























































Результаты поиска

Содержание CA M-150-W-F

Отзывы:

Biddle CA M-150-W-F, Руководство пользователя и инсталлятора, Страница: 34 / 60

Результаты поиска

Содержание CA M-150-W-F

Отзывы: