TELEMATICS: TELEMATIC SETTINGS 35
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
The incoming log file will be found in your computer. De-
fault destination directory depends on modem settings
and can be changed. In most cases the log file can be
located at the root directory of the modem application.
The binary-coded log file name contains U (or some oth-
er) letter and the phone´s serial number. The log file
identifier is
.bin.
Sample case by using Windows Hyperterminal:
S
TEP
1: C
ONFIGURING
MODEM
APPLICATION
FOR
DATA
RECEPTION
1. Connect the receiving mobile phone to the computer by
data cable and open the
Windows Hyperterminal
modem application.
2. Open
New connection
(from the
File
menu if the dia-
log box is not displayed).
3.
Name
the connection ->
Ok
.
4. Select
port
for the connection (e.g. COM1) ->
Ok
.
5. Set transfer speed to
19200 Bits/Second
->
Ok
.
6. Open
Receive file..
from the
Transfer
menu.
7. Click
Browse
and find the desired destination directory
->
Ok
.
8. Select
Z-modem
for
Receiving protocol
->
Receive
.
When the modem configuration is done, you may save the
file by clicking
Save as...
from the
File
menu.
Close the connection by clicking
Disconnect
from the
Call
menu.
From now on, whenever you need this connection, you can
use the profile just created by selecting
Open...
from the
File
menu.
S
TEP
2: R
ECEIVING
REMOTELY
SENT
LOG
FILE
Connect the receiving phone to the computer by data ca-
ble/BWcable and open the
Windows Hyperterminal
mo-
dem application.
To ensure the connection between mobile phone and the
modem, you may key in
ATI
on the screen and press Enter
-> the modem will identify receiving mobile phone.
Key in
ats0=1
and press Enter -> the mobile phone will
answer automatically to incoming CSD calls.
When the mobile phone starts alerting, the modem will dis-
play
RING
. When the mobile phone answers, the data
transfer dialog box appears on the screen. When the trans-
fer is finished, the dialog box disappears and the connec-
tion can be switched off.
If you do not use the automatic answer, do as follows
(when the phone starts alerting): Press the Hook-up key on
the phone keypad OR key in
ATA
on the screen and press
Enter.
N
OTES
:
The Trace settings (Trace data call number, trace sms
number, Error reports and the automatic trace transfer),
as well as Service center number must be configured in the
phone in advance. For more information, see
SERVICE CEN-
TER NUMBER ON PAGE 32
and
TRACE LOG SETTINGS ON PAGE
33
, and
ERROR REPORTS ON PAGE 31
.
Automatic answer setting of the receiving mobile phone is
for voice calls, not data calls and thus it must be turned
off.