SENSOR SETTINGS: VERTICAL SENSOR 55
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
Post-alarm interval
After the emergency cycle ends, the phone will make
audible alarms at regular intervals. This is done to
help any rescuers in locating the person in emergen-
cy. Also reception of phone calls is possible.
Key in the post-alarm interval (6) in seconds.
The phone polls the sensor signal during this phase.
In order to stop the post-alarm tone, the phone must
be lifted up to correct position.
Alert trigger
You can select alert trigger for the sensor (7). Click
the arrow and highlight the desired option.
E.g. by selecting
Alerts when horizontal
, you determine
that the sensor´s normal orientation is vertical, and
being horizontally orientated causes sensor to alert.
The phone is assumed to be incorrectly orientated
once the rotation angle exceeds 45°.
Missing sensor alert
If the special battery including the sensor unit is re-
placed by a normal battery, the phone becomes un-
able to detect the presence of a sensor. In this case,
the phone will proceed as follows:
1. The phone will make audible alarm and display no-
tification
Not detected
.
2. The phone will send an MPTP message to the ser-
vice center. The message sent is a status message
with status code 112, containing the phone´s last
known position. For more information on this, see
the separate MPTP document.
3. The phone will repeat the procedure each time it is
powered up.
Vertical sensor alerts
To let the emergency cycle take place: Do nothing.
To cancel sensor alert and prevent emergency cycle
from starting, lift the phone up to vertical position. Do
it while the countdown timer is still shown.
To mute the audible alert tone, press the left soft key
.
.