10 B: THE BENEFON CONFIGURATOR SOFTWARE AND LOCAL CONFIGURATION
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
7. At the same time, the software reads data from the
phone and loads it in the display. The data con-
tains currently existing settings and menus from
the phone. These settings and menus are shown as
sub-nodes, such as
Messages, User settings,
and
Telematics settings
.
8. If the software requests security code while load-
ing the settings, you must key in the code and
press
Ok
. For more information on security code,
see
SECURITY CODE FOR TELEMATICS AND GPS ON PAGE 57
.
9. Click the name label, e.g.
Track Pro
. The sub-nodes
will be displayed as icons on the working area, i.e.
the Document window,
on the right.
10.You can select the desired sub-node/icon by click-
ing it. The data fields will be displayed.
Loading settings from the phone
to the software
As you connect the phone to the software, all current
settings in the phone are copied to the software.
To load only part of the settings to the software,
choose
Configurator...
from the
Edit
menu (before
pressing
Connect
button). Check the desired setting
groups - the groups are shown in the
Mobile phone start
up tasks
. Click
Ok
while the dialog box is displayed.
Unloaded settings can be loaded afterwards in the
same session by choosing
Open NNsettings
from the
Mobile
menu.
Saving settings in a computer disk
If the phone is not currently connected to the soft-
ware, you can still make configurations, save them
and transfer them to the phone afterwards. When
working in off-line, data fields are available for editing
via
My Computer
node.
1. To save data in a computer disk, choose
Save as...
from the
File
menu.
2. Select the destination drive and folder, and re-
name the file the way you like. Click
Save
. The soft-
ware stores all data fields that the chosen node
contains.