30 TELEMATICS: TELEMATIC SETTINGS
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
- If the service center number is NOT defined, re-
sponses are sent to the number from which the
request came.
M P T P M E S S A G E S T O R A G E
If sending of an MPTP message fails, the phone will
send the message later, assuming the MPTP protocol
message storage is turned on and there is space left
to deposit the message. Use of the MPTP protocol
message storage must be configured in the phone.
By checking the box (3) you select that the telematics
protocol messages are put into storage, if there is no
service at the moment. The storage capacity is 100
messages. After the phone is in service again, these
messages are automatically sent forward shortly af-
ter.
M E S S A G E V A L I D I T Y
You can select the length of validity for
telematics
protocol messages
, i.e. for how long the SMS messag-
es are stored in the server of the operator (4). (The
length of validity for normal SMS messages is selected
elsewhere, in the
User settings
).
This setting can be used to avoid massive helping ef-
forts in case an emergency message has been sent a
week ago and there is a reason to believe that help is
no longer needed.
You can choose the message validity from these:
1
hour, 6 hours, 24 hours, 1 week
or
Maximum time
.
S M S S E R V I C E N U M B E R
You can set separate SMS service number for the
telematics protocol messages (5). If the number is not
set, the normal short message service number (in the
User settings
) is used instead. Key in the number and
confirm it.