52 TELEMATICS: POWER
CONFIGURING SETTINGS FOR THE BENEFON TRACK PRO
Creating waypoints
•
Name
(1): You may key in the desired name for a
waypoint. You can define up to 30 separate, circular
areas: The areas are separated from each other by
an
ID number and a name.
•
Center point coordinates
(2): The waypoint area is
defined by keying in
Latitude
and
Longitude
and a
Radius
of an area in meters. The radius should be
rounded to tens, otherwise the software does the
rounding. E.g. by entering 67, the actual radius will
be rounded to 70 meters. 50 meters is the minimum
value.
•
Alarm
(3): After activating a waypoint, you can
select an alarm option for this waypoint. You have
three options: Alarm will be turned on when arriving
to a waypoint, departing from a waypoint, or when-
ever crossing the borderline (both directions). Each
waypoint can have alarm option of its own.
•
Activation of a waypoint
(4): To activate a waypoint,
check the
Active
box (on the same row), to deacti-
vate the waypoint, leave the check box blank.
NOTE: Waypoint tracking does not contain automatic
switch off or duration options. The feature must be
separately deactivated when it is no longer needed.
Resetting the coordinates
To reset the coordinate values, click the latitude and
longitude data fields (the ones that you want to re-
set).
Marking all waypoints for activation/
deactivation at once
Click the
Active
box on the top row (5).
Note that activation/deactivation will actually take
place only after you have transferred the information
to the phone.