Bell System bellagio, Руководство по установке и эксплуатации

Страница: 28 / 52

bellagio Digital Entry System
PD
–
281 Issue 1 Installation and Operating Manual Page 28 of 52
RING TIME
–
Ringing Time/Call Time and Ring Effect
Enter from 0 to 15 as per the table
Setting Ring Time Ring Cadence or Sound Effect
0 5s 1 in 3
–
1 ring every 3 seconds
1 8s 1 in 3
–
1 ring every 3 seconds
2 10s 1 in 3
–
1 ring every 3 seconds
3 15s 1 in 3
–
1 ring every 3 seconds
4 20s 1 in 3
–
1 ring every 3 seconds
5 30s 1 in 3
–
1 ring every 3 seconds
6 40s 1 in 3
–
1 ring every 3 seconds
7 45s 1 in 3
–
1 ring every 3 seconds
8 50s 1 in 3
–
1 ring every 3 seconds
9 60s 1 in 3
–
1 ring every 3 seconds
10 30s 1 in 3 (Reserved For future use)
11 30s 1 in 3 (Reserved For future use)
12 30s 2 in 15
–
2 rings, 15S silence, repeat
13 30s 1 in 15
–
1 ring, 15S silence, repeat
14 30s 1 in 5
–
1 ring every 5 seconds
15 30s* 1 in 3*
–
1 ring every 3 seconds
* Default setting
TALK TIME
–
Talking Time/Videophone Active
Enter from 0 to 15 as per the table
Setting Talk Time Setting Talk Time Setting Talk Time Setting Talk Time
0 15s 4 60s 8 150s 12 60s
1 20s 5 75s 9 180s 13 60s
2 30s 6 90s 10 60s 14 60s
3 45s 7 120s 11 60s 15 60s*
* Default setting
TONE MODE
–
Re-assurance Tone
To conform to DDA requirements the controller can provide a re-assurance tone at the
door when an videophone is being called and also when the door lock has been operated.
The volume is adjustable from 0 using the volume control on the BFD-DIG controller PCB
(see the diagram on page 10). In addition there is a choice of which tone is sounded.
Four settings are available:
–
[Both] = Ringing and lock tones.
[Call] = Ringing tone only.
[Lock] = Lock tone only.
[None] = No tones.