BELL LABS INNOVATIONS Lucent Technologies MERLIN MAGIX, Установка, СПМ, обслуживание и дополнение по устранению неполадок

Страница: 134 / 280

Reassigning MDW 9031 Line Buttons
5-4
Installation, SPM, Maintenance, and Troubleshooting Supplement
f. Select
Delete
( ).
g. Select Button 3 on the console or PC (maps to Button 5 on the MDW
9031 telephone).
h. Select
Delete
( ).
i. Save your entry by selecting
Enter
( ).
2. Assign the ICOM Voice button as shown in Figure 5-2:
a. Select Button 6 on the console or PC (maps to Button B on the MDW
9031 telephone).
b. Enter
*16
to assign SA Ring. Then select Button 6 on the console or
PC again, and enter
*19
to change the attribute to SA Voice.
c. Select Button 2 on the console or PC (maps to Button 1 on the MDW
9031 telephone).
d. Enter
*18
to assign SA Originate Only Ring. If you want to change the
attribute to an SA Originate Only Voice button, select Button 2 on the
console or PC again, and enter
*19
to change the attribute to SA
Originate Only Voice.
e. Select Button 9 on the console or PC (maps to Button D on the MDW
9031 telephone).
f. Enter
*777
to assign Button D on the MDW 9031 as a Drop button.
g. Save your entry by selecting
Enter
( ).
h. Exit to the System Programming menu.
Key Mode
5
In Key mode, the system assigns an ICOM Ring button, an ICOM Voice button
and the first eight outside lines connected to the control unit to the MDW 9031
telephone based on the MLS-12D button assignments (see Figure 5-3).