Beko DRYPOINT AC 410, Инструкция по установке и эксплуатации

Страница: 8 / 56

Installation and operating manual
EN
8 DRYPOINT
®
AC 410 – 495 | DRYPOINT
®
AC 410 – 495 MS
1.3.1. Safety precaution during plant operation
Compliance with the statutory safety and operating regulations is a prerequisite for trouble-free and safe operation
of the plant. Strictly adhere to all applicable internal work instructions.
• The plant must be regularly inspected for visible damage.
• Faults and defects that might impair its safety must be eliminated without delay. In the event of malfunction,
follow the instructions in “8. Troubleshooting and repair”. Should you be unable to resolve the problem, contact
the manufacturer.
• The plant, including its control system, must only be operated by suitably trained and instructed personnel.
DANGER Manual pressure relief during operation
Manual pressure relief during plant operation might result in serious injury and/or damage to
property.
• Never open the manual pressure relief ball valves while the plant is in operation.
WARNING Blow-off noises during pressure release
When compressed gas is released, it expands, which can be result in a loud noise.
• Therefore always wear hearing protection!
1.3.2. Risk of injury from electric energy
DANGER Electric power
Incorrect connection or damaged components can cause serious or even fatal injury.
• All work on electrical connections and devices must be performed by authorised specialist
technicians and according to DIN VDE regulations (or equivalent national regulations) and
the instructions of the utility company.
• If work needs to be performed on powered parts, a second person must be deployed to
shut down the main switch, should it be required.
• Cordon off the working area and set up warning signs.
• Use only insulated tools.
• The electrical equipment of the plant must be tested regularly.
• Use only original fuses of the correct rating.