Beko DRYPOINT AC 410, Инструкция по установке и эксплуатации

Страница: 12 / 56

Installation and operating manual
EN
12 DRYPOINT
®
AC 410 – 495 | DRYPOINT
®
AC 410 – 495 MS
NOTE Damage caused during transport or storage
Incorrect transport or storage, or the use of unsuitable lifting equipment might cause damage
to the plant.
• The plant must only be transported and stored by authorised and suitably trained
specialist technical personnel.
• If you detect any damage, do not start the plant.
• Always adhere to the specified transport and storage temperatures.
• Special care is required during transport and when loading and unloading the plant!
Never use force!
• Ensure that the permissible maximum load of the lifting gear used at the operator's
premises is not exceeded.
• When transporting the plant with a lift truck, lift the plant by its support frame or the
profiled timber frame.
NOTE Transport of plant by its pipes
Never lift the plant by the pipes, as this might result in leakage or serious malfunction of the
plant.
• Lift the plant only by the lashing points provided, using suitable lifting gear.
The DRYPOINT
®
410 – 495 adsorption dryers are shipped in a cardboard box and on a profiled timber frame.
Despite our best efforts regarding packaging, etc., the plant might be damaged during transport. Upon receipt,
please remove all packaging material and inspect the plant for visible damage. If you detect any such damage,
immediately notify the carrier company and
BEKO
TECHNOLOGIES GMBH or one of its agents.
To store the plant, place it in its original packaging and
store it in an enclosed, dry and frost-free room. Ensure
that the storage temperature does not exceed the limits
specified on the type plate.
Even when packaged, take suitable measures to
protect the plant against the elements.
While in storage, secure the plant so that it cannot
topple over or fall, and protect it against vibration.
NOTE Recycling of packaging material
• The packaging material is recyclable. Dispose of the packaging material according to the
applicable statutory regulations.