Service Instructions Automatic Single-Head Serging Machine 1265-4
Beisler GmbH
C-10
C.5
Maintenance
Warning - Electric shock!
Contact with current-carrying components may cause a le-
thal electric shock.
If the machine is put in motion accidentally, persons in its
direct vicinity may be caught by moving parts which may
cause injuries.
Prior to any service, cleaning or maintenance works, dis-
connect the machine from the power supply system!
Turn the machine off using the main switch.
Remove power plug from socket and protect it against
accidental reconnection.
If the power supply is not required for repair or set-up
work, the machine must be disconnected from the po-
wer supply system.
C.5.1 Inspection
The machine must be inspected annually. The inspection comprises
particularly the following items:
safety devices of the machine,
operativeness of the program control,
correct function of inputs and outputs.
C.5.2 Cleaning
The machine must be cleaned after large production series or at least
once a day, whichever occurs first.
Cleaning the machine surfaces:
1. Disconnect machine from power supply system.
2. Remove fabric residues.
3. Blow off dust and thread residues thoroughly from the sewing head,
from the working plate, from the clamp, and from the linear rail using
compressed air.
4. Wipe machine components dry using a dry, clean cloth.
NOTE - Plastic surfaces
Some parts of the machine surfaces are made of plastic
materials. Solvents can dissolve plastics and make them
unusable.
Do not clean the machine surfaces (particularly the opera-
ting panel) with cleaning agents that contain solvent.
