Operating Instructions Automatic Single-Head Serging Machine 1265-4
Beisler GmbH
B-20
B.3
Operation
Changing values
1. Select the function:
Press the
c
key,
s
until the symbol assigned to the input field appears on a black back-
ground.
2. Increase or reduce the value using the arrow keys:
Press the
&
or
/
key.
3. Confirm input:
Press the
(
key.
v
Top transport
Within a sewing program, the width distribution can be corrected by quick
adjustment of the top transport.
To achieve this, the position of the top transport unit to the main transport
unit can be changed within a value range of -19 to +19. This setting affects
only that section of the seam for which fullness has been enabled.
w
Differential transport
The position of the differential transport unit to the main transport unit of
the sewing unit can also be changed by quick adjustment within a value
range of -19 to +19. This setting affects only that section of the seam for
which fullness has been enabled.
#
Puller speed
The photocell determines the deviation of the fabric contour from the ideal
routing and readjusts the puller speed, as required.
If the sewing pieces are shifted sideways away from the stop, the pul-
ler speed is too high,
if the sewing pieces warp at the stop, the puller speed is too low.
The basic speed of the puller can be changed by using the input field.
x
Roller
The parameter changes the length of the distance along which the roller
transports the sewing piece from the sewing head on the worktable to the
stacker.
