D-14
Programming Instructions Automatic Single-Head Serging Machine 1265-4
Beisler GmbH
D.3
Programming
Section:
1. Select the function:
Press the
c
key,
s
until the symbol assigned to the input field appears on a black back-
ground.
2. Move to the basic parameter menu of the selected function:
Press the
%
key.
3. Activate/deactivate individual sections:
Press the
c
to
g
key.
4. Confirm input and exit menu:
Press the
(
key.
Setting fullness (quantity) and length (cm) of the section:
The individual input fields are scrolled from left to right.
1. Activate / deactivate input field:
Press the
$
or
§
key.
2. Modify the value:
Press the
&
or
/
key.
or enter the two-digit value using the numeric keypad. Input se-
quence: Tens digit, units digit.
3. Confirm input and exit menu:
Press the
(
key.
#
Puller speed
The photocell determines the deviation of the fabric contour from the
ideal routing and adjusts the puller speed accordingly, if required.
If the sewing pieces are shifted sideways away from the stop, the
puller speed is too high,
if the sewing pieces warp at the stop, the puller speed is too low.
14 PULLER SPEED
Major parameter / basic setting for speed
15 PULLER FASTER
Speed increase if sewing piece warps at stop
