Beckhoff EL3692, Документация

Страница: 133 / 162

Commissioning
EL3692 133 Version: 2.1
Objects for commissioning
Index 1011 Restore default parameters
Index (hex) Name Meaning Data type Flags Default
1011:0 Restore default param-
eters Restore default parameters UINT8 RO 0x01 (1
dez
)
1011:01 SubIndex 001 If this object is set to " 0x64616F6C" in the set value di-
alog, all backup objects are reset to their delivery state.
UINT32 RW 0x00000000
(0
dez
)
Index 80n0 SAI Settings (for Ch.1 (n=0); Ch.2 (n=1)
Index (hex) Name Meaning Data type Flags Default
80n0:0 SAI Settings Maximum subindex UINT8 RW 0x3E (62
dez
)
80n0:01 Enable vendor calibra-
tion Manufacturer calibration is active. BOOLEAN RW 0x01 (1
dec
)
80n0:02 Enable user calibration User calibration is active. BOOLEAN RW 0x00 (0
dec
)
80n0:05 Enable delay time
The set delay time [
}
133] for this channel is active.
BOOLEAN RW 0x00 (0
dec
)
80n0:09 Disable Autorange The Autorange function is disabled.
Is only saved if the output data are not active.
BOOLEAN RW 0x00 (0
dec
)
80n0:0D Mode Measuring mode of the terminal:
0: 4-wire measurement
1: 4-wire measurement (single-shot mode)
2: 2-wire measurement
3: 2-wire measurement (single-shot mode)
Is only saved if the output data are not active.
Bit-Field[4] RW 0x00 (0
dec
)
80n0:11 Range Measuring range:
-1: 10 mΩ - 100 mΩ
0: 100 mΩ - 1 Ω
1: 1 - 10 Ω
2: 10 - 100 Ω
3: 100 - 1 kΩ
4: 1 k - 10 kΩ
5: 10 k - 100 kΩ
6: 100 k - 1 MΩ
7: 1 M - 10 MΩ
Is only applied if the output data are not active.
INT8 RW 0x00 (0
dec
)
80n0:1D Presentation 0: left-aligned
1: right-aligned
2: scaled 1 bit / µΩ
3: scaled 1 bit / mΩ
4: scaled 1 bit / Ω
5: Display as REAL value
See also:
Specific data [
}
115]
Bit-Field[4] RW 0x01 (1
dec
)
80n0:21 Filter Settings Setting the hardware filter in ADC
0: 2.5 Hz
1: 5 Hz
2: 10 Hz
3: 15 Hz
4: 25 Hz
5: 30 Hz
6: 50 Hz
7: 60 Hz
8: 100 Hz UINT16 RW 0x02 (2
dec
)
80n0:31 Delay time Delay time for this channel
n*20 ms in the measuring ranges <1 MΩ, n*50 ms in
the measuring range 7 (1 MΩ - 10 MΩ)
UINT8 RW 0x00 (0
dec
)
80n0:3E Steady state tolerance If the last four values are no more than x / 1024 of end
value apart, the "Steady state" bit is set to TRUE
UINT16 RW 0x00 (0
dec
)
Objects for the user calibration
User calibration offers the option to process the value of the terminal further after manufacturer calibration.
This can relieve the PLC.