FITTING THE OUTER CASE
First turn off the fire and allow it to cool down.
There are 3 outer case components which are to
be fitted as follows:-
FIRE TOP PANEL
Hold the panel on either side with the screw fixing
holes towards the front.
Angle the panel backwards and by guiding the centre
locating ledge at the rear of the panel, into the slot
provided on the fire, locate the panel onto the fire.
The front of the panel should now be brought down
so that the screw fixing holes are forward of the
captive nuts provided on the fire. Secure the panel
using the two
1
/
2
in self tapping screws provided.
FIRE FACIA
Locate the facia on the lip at the top of the
fire.
Secure the two fasteners at the bottom
of the facia by pushing in and turning
clockwise.
HEARTH
Guide the hearth locating pins into the
holes in the facia.
Push the bottom of the hearth
inwards to ensure the clips on either
side are engaged.
These instructions and the users instructions
should be handed over to the customer. At the same
time the customer should be shown how to operate
the fire safely and efficiently.
The need for Annual Servicing should be pointed out
and returning of the guarantee card advised.
Fire Top Panel
Fire Facia
Hearth
Locating Lip
Locating Lip
Centre Locating Ledge
at Rear of Top Panel
19
