LIGHT BULBS
Your attention is drawn to the safety notice found on
the lamp box. With the electricity supply to the fire
isolated, the light bulbs can be changed as
necessary. They should only be replaced with 15
Watt pygmy bulbs.
GLASS FRAME ASSEMBLY
Ensure that the glass panel is cold.
The 3 clips that secure the glass frame assembly are
now visible across the top edge of the glass
frame. The two outer clips should be released
before the centre one. Release the clips by
gripping centrally and pulling upwards.
When the clips are released, the glass frame
assembly will lean outwards to rest on its
bottom location positions, from which it can
be lifted clear of the fire.
Fit the new glass frame assembly by lowering
it into its bottom location positions and pushing
it back onto the sealing rope. Engage the clips
onto the front edge of the frame and push down to
lock. The centre clip should be secured before the
outer clips.
ROPE SEAL
Remove the glass frame assembly.
Pull the rope seal out of its location channel and
discard.
Fit the new rope seal into the location channel by
locating the centre of the rope seal into the centre of
the top location channel and working around the
channel so that there is an equal length down either
side.
Replace the glass frame assembly.
COAL BED
Remove the glass frame assembly.
The coalbed is positioned on two locating pins. Lift
the coalbed vertically to clear the pins.
CAUTION:- The coalbed is extremely fragile and
must be handled accordingly. Gloves should be
worn and any inhalation of the dust should be
avoided. Keep the coals away from children at all
times.
Fit the new coalbed by lowering it onto the location
pins.
Replace the glass frame assembly.
Rope Seal
Glass Frame
25
