6 Installation
6.1
Installation regulations
Warning
The components used for the connection to the cold water supply
must comply with the prevailing standards and regulations in the
country concerned.
Pursuant to European Regulation 517/2014, the equipment must be
installed by a certified operator whenever the refrigerant load is in excess
of 5 tonnes of CO
2
equivalent or when a refrigerant connection is
necessary (the case with split systems, even when fitted with a quick
coupling device).
Caution
Installation of the heat pump must be done by a qualified
professional in accordance with prevailing local and national
regulations.
6.2
Data Plates
6.2.1
Data plate on the indoor module
The data plates identify the product and provide the following important
information.
The data plates must be accessible at all times.
Important
Never remove or cover labels and data plates affixed to the
appliances. Labels and data plates must be legible throughout the
entire lifetime of the appliance.
Damaged or illegible instructions and warning stickers must be
replaced immediately.
6.2.2
Data plate on the outdoor unit
6.3
Respecting the distance between the indoor module and the outdoor unit
To ensure that the heat pump functions correctly, respect the minimum
and maximum connection lengths between the indoor module and the
outdoor unit.
Fig.16
MW-1001195-1
Fig.17
MW-M001832-1
6 Installation
26
7762758 - v05 - 19082020
