Fig.49
MW-8800N001-3
2
1
2
1
1
2
H
1/2 H (min. 2,5 m)
1/2 H (min. 2,5 m)
1/2 Z
H
Z
1 Optimum location
2 Possible position
H Inhabited height controlled by the sensor
Z Inhabited area controlled by the sensor
Positions to be avoided
Avoid placing the outside sensor in a position with the following
characteristics:
Masked by part of the building (balcony, roof, etc.).
Close to a disruptive heat source (sun, chimney, ventilation grid, etc.).
Fig.50
MW-3000014-2
6.8.11 Connecting the outdoor temperature sensor
1. Connect the outdoor temperature sensor to the T Out input on the
SCB-10 PCB of the indoor unit.
Important
Use a cable with a minimum cross-section of 2x0.35 mm
2
and a
maximum length of 30 m.
Fig.51
MW
-1001221-1
1
6 Installation
46
7762758 - v05 - 19082020