Important:
The spacers provided with the trim pack must always be fitted. Never
reduce the depth of the spacers in any way. Always replace the spacers with authorised
spares (See figure 39).
14.5 Fitting the Amour, Tranquility, Aspect and Aspect Glass fascia.
1.
Remove any protective film from the fascia.
2.
Carefully lift the fascia.
Place the fascia against the fireplace front surface so that
the four retaining plates at the back of the fascia are
directly above the four retaining brackets of the hotbox.
There are two at the top of the hotbox and two to the
side of the burner module. Lower the fascia unit making
sure that the retaining plates locate fully into the brackets
on the hotbox (See figure 40).
Page 35
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 39 Spacer gap
Figure 40. Fascia location
(Shown with Aspect fascia)
