3.
The fascia decorative trim is
made up of four sections. A
bottom and top section of equal
length and two shorter sections
of equal length that are the side
sections. These can be identified
as in figure 28.
4.
Remove any protective film
from the trim sections
5.
The trim sections are held in
place using 16 magnets.
Position the magnets as in
figure 28.
The order in which the trims
are fitted is important.
6.
Locate the bottom trim as
in figure 29.
7.
Locate the two side trims
as in figure 30.
8.
Locate the top trim as in
figure 31.
Page 31
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 31 Fitting the top trim.
Figure 30 Fitting the side trims.
Figure 29 Fitting the bottom trim.
