14.3 Fitting the trims to the Fascination
fascia.
1.
Remove any protective film from the
fascia.
2.
Lay the fascia frame on a flat surface with
its front facing up.
3.
The fascia decorative trim is made up of
four sections. A bottom and top section of
equal length and two shorter sections of
equal length that are the side sections. These
can be identified as in figure 35.
4.
Remove any protective film from the trim
sections
5.
Locate the side trims as in figure 36.
6.
Locate the bottom and top trims as in
figure 37.
Page 33
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 36 Fitting the side trims.
Figure 35. Identifying decorative
trims
Figure 34. Fascia heat baffle location
