Baumuller b maXX 5000, Инструкция по эксплуатации

Страница: 18 / 330

Risk assessment according EU Directive
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
18
of 328
2.4
Mounting Unprotected hands can be injured at the sharp edges of the device.
m Wear safety gloves!
Unprotected eyes can be injured by thrown up metal particles caused by drilling or making
cut-outs.
m Wear safety glasses!
Short-circuit in
power cables In case of a short-circuit high current flows. This current induces a magnetic field in cable
loops. The magnetic field can cause failures of the device.
To avoid additional damage in case of a short-circuit in power cables,
n The connection between power supply and device or between device and motor
must be laid without loop.
Device
Motor cable or
Device
power connection
Motor cable or
power connection
Figure 1: Wiring of the power cables
Installation If a shielded cable is connected unshielded and this causes failure of the device/danger
to persons, the system manufacturer is responsible for.
Brake resistor
connection The dissipation of the heat loss of the external brake resistor must be ensured.
Communication
errors Ensure that a failure of the device will cause no danger to persons.
The safety notes of all further chapters of this documentation need to be carefully ob-
served!