Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 104 / 284

６‐４
The design information screen has the following contents.
Design No.
：
Memory location of the design
Design Name
：
Name of the design
Stitch Count
：
Total stitch count of the design
SIZE
：
Distance between the overall dimensions of the design measured in
tenths of millimeters.
PASS
：
Distance between the start and end points, shown as horizontal
and vertical values, measured in tenths of millimeters.
P1
：
Distance from the start point to the bottom left corner of the design,
measured in tenths of millimeters.
P2
：
Distance between the start point and the top right corner of the pattern
measured in tenths of millimeters.
V scale
：
“V scale” of the Program Settings.
H scale
：
“H scale” of the Program Settings.
Angle
：
“Angle” of the Program Settings.
A : Displays Design conditions icons for the design.
*Refer to “Chapter 3, 7.
Information Screen”
for details on design conditions icons
The Design image is shown in the center of the screen.
The Secondary Information directly below the Design image shows the following
information:.
NC : Next Color change. This is the first change-color function in the design
: “ – “ is displayed if the design doesn’t have a change-color function
TCF : Total Color change Functions in the design
R.Time : Estimated Remaining Time. (Number in parenthesis is the speed of the
machine).
The estimated remaining time is calculated by the presently set speed of
the machine.
“R.Time” is highlighted when set to high efficiency mode.
Please refer to the next page for details about high efficiency mode.
Color Bar : Shows the change-color functions in the design by a color bar graph.
* Please refer to “
Chapter 13, 1. Function Codes
” about change-color functions.
* Please refer to “
Chapter 9, 3. Speed
” about changing the speed of the machine.
The left side of the display shows the screen colors for each needle.
* Please refer to “ Chapter 11, 5. Setting Thread Color Display ” about setting the screen
colors for each needle.