Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 224 / 284

11 - 17
5) When selecting an “IP Address”, “Subnet mask”, or “Host IP” to change,
Press the E-key and the following menu is displayed
-Use the left and right Jog keys to select a number to change in the address.
-Use the top and bottom Jog keys to change value.
- Or Refer to “
Chapter 3, 14. Numeric Entry”
to use the numeric entry.
*To cancel, press the E-key again to cancel changes.
Press the G-key to save the setting.
6) To Initialize settings, press and hold the F-key to set network settings back to
default. Please refer to “
Chapter 3, 10. Confirmation Message”
for saving settings.
7) Press the Preference key to exit and save settings.
* When a network setting is changed, the confirmation screen is displayed.
Please refer to “
Chapter 3, 10. Confirmation Message”
about the confirmation screen.
* Network setting changes are not active until the machine is rebooted. Please turn the
machine OFF after making changes.
If a network setting was changed but is not active, the network connection icon on the
information display screen is blacked out. Reboot the machine to activate settings.
Please refer to “
Chapter 3, 7. Information Screen
” for details.