Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 147 / 284

8
‐１１
Press the C-key to switch H and V direction offset settings if necessary.
「
A.H.offset
」 「
A.V.offset
」
「
F.H.offset
」 「
F.V.offset
」
Press the D-key if necessary to exit and return to the Program list without setting
the amount of offset. (The actual icon may vary, depending on the selected parameter)
Press the B-key if necessary, to move the frame to the currently set offset position.
5) Use the Jog keys to move the frame to the desired offset position.
*Use the up-down Jog keys to set an H direction offset.
Use the right-left Jog keys to set a V direction offset
Press and hold the A-key if necessary to move the frame back to the design origin.
(Caution! This action moves the frame to the origin set point of the design.)
6) Press the G-key to enter the new offset setting.
7) Press the D-key to save the setting. This action also moves the frame to the
origin of the design and returns you back to the Program list.
(Caution! This action moves the frame to the origin set point of the design.)