Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 17 / 284

２‐４
9. Design Information
Design information such as total stitches, quantity produced, size, and thumbnail of the design
can be seen on the screen.
10.Stitch Length Adjuster
Swing parameter allows satin stitches to be automatically sewn slightly wider or narrower
depending on the setting. This feature is helpful sewing small lettering when they need to be
sewn with a bolder effect.
11.Automatic Appliqué Positioning
This feature moves the pantograph out to a programmed position, when the machine stops for
an appliqué to be applied. This allows the operator to easily apply the appliqués to the
garments. This can also be used for replacing frames at the end of sewing.
12.Multi-Point
This function allows you to register points where you would like the pantograph to move to.
A maximum of 15 points can be registered, as P01 to P15.
The pantograph can then be moved to one of these points using a Manual key operation or
programmed in F-list.
13.Socks
Automatic design conversion for socks.
14.Matrix Embroidery
Automatic layout for the Matrix embroidery.
Easy setting can create a repetition of designs.
15.The registration of the start position
The controller automatically saves the last start position of designs in memory. When you go to
sew a design a second time, you can start from the last start position.
16.Trace
The controller can show the area to be sewn on the screen and by using a four-point trace or
outline trace.
17.Displaying Embroidery points
You can enlarge the display of an embroidering point by touching a key while sewing, without
interrupting the embroidering operation.
This function allows you to easily confirm embroidery details in a pattern.