Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 215 / 284

11 - 8
Icon Parameter
Function/Action
Range Of
Value
Default
Value
18
Appliqué
Sets presser foot height when the manual Appliqué
command is executed. Parameter is set in degrees,
referring to the presser foot height as shown on the
degree wheel.
*This method may be used for verification of start
position.
60 – 120
[degree]
80
19
T - Break
The m/c is designed to stop automatically when
the top thread is broken. Normal value is 3,
meaning the m/c requires three consecutive
thread break detections before stopping.
*If the m/c does not stop even though a thread
break occurs, changing the value to 2 may correct
the problem.
*If the m/c stops because of false thread breaks,
changing the value to 4 or 5 may correct the
problem.
1 – 9
[stitch]
3
20
0 admit
Determines the number of 0 data stitches allowed
when the pattern is read into memory.
0 = deletes all 0 data, letting none into the
pattern in memory. Setting at 1 allows one 0
data stitch, etc. up to 8.
9 = Allows all 0 data stitches into memory.
*All 0 data stitches will be deleted automatically
after a trim code, even if set to 9.
0 - 9 0
21
Combine Data
Determines the smallest stitch length allowed
when a pattern is read into memory. Stitches
smaller than the allowed length are combined into
larger stitches.
0 = Off. No changes
1 = less than 0.1mm stitches are combined into
larger stitches.
2 = less than 0.2mm stitches are combined into
larger stitches.
5 = less than 0.5mm stitches are combined into
larger stitches.
* Less than 0.4mm stitches will be combined into
larger stitches automatically after the thread is
trimmed.
0 - 9 0
22
Right Limit
Sets right soft limit – allowable distance the
pantograph can move to the right of the
mechanical origin.
0 – 3200
[mm]
500