５‐３５
9. Saving through the COM port
A COM connector is located on the back of the BEXS Automat. Designs can be loaded from
a device connected to the COM port. Devices using RS-232C can be connected and used.
*Note: Must use a (null modem) crossover cable for the connection.
1)
Press the Design Loading/Downloading key
.
2)
Press the A-key,
.
3)
Using the Jog keys, select a design in memory you want to save.
Press the C-key
to display the design information.
*Refer to “
Chapter 6, 2. Design Information”
for details.
4)
Use the F-key
if needed, to change the Tape code.
*Refer to
“Section 8-1. Loading a New Design through the COM port”
in this chapter for details.
The E-key
is for changing the loading speed.
*Refer to “
Section 8-1. Loading a New Design through the COM port
” in this chapter for details.
5)
Have the connected device ready to receive the design.
6)
Press the G-key,
to start uploading the design to the connected device.
Содержание BEXT 120V
