Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 50 / 284

４‐８
5. Change Frame
Change frame moves the pantograph forward to allow framing or positioning of an appliqué.
This movement, called frame offset, is automatically set at the pattern height. A different frame
offset distance can be set for each pattern in the Program settings.
See “Chapter 8 Programs”
for details
.
1. Press the Manual Key to open the Manual operation screen.
2. Press the C-key .
3. The following D14 message appears, indicating to use the Start Key.
Push the Start Key and the pantograph will move forward, by the height of
the pattern, unless a different value was set in the Program settings.
To cancel, press the C-key again to go back to the Manual operation screen.
4. Once the frame has been changed or the appliqué fabric placed, press the Start Key to
return the pantograph to its original position.