Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 162 / 284

9 - 8
5) The Trace screen appears.
The following information is shown on this page:
R.space: Distance from the design to the right edge of the Border line
L.space: Distance from the design to the left edge of the Border line
F.space: Distance from the design to the front edge of the Border line
B.space: Distance from the design to the back edge of the Border line
*Press the A-key again to go back to the Drive Mode screen.
6) The design moves as the Pantograph moves with the Jog keys.
The borderline is normally shown in Blue. However, as the design gets closer to the line,
it turns to yellow, then red.
7) Press the F-key to start the Perimeter trace.
*If the design interferes with the border line, the machine makes a beep sound and stops
the trace in that direction. Relocate or resize the design so it fits within the border.
Border line area of
sewing space.
Design to be sewn