Barudan BEXT 120V, Инструкция по эксплуатации

Страница: 133 / 284

7 - 18
6. Setting Sub-Soft Limits
The machine software allows 3 embroidery areas (frame types) that can be programmed to
limit the movement of the Pantograph. This feature is called a Sub-Soft Limit.
Program the lower left corner (P1) and the upper right corner (P2) for each area.
The pantograph movement will be limited to the rectangular area created by these 2 corners.
*Programming the 2 corners is done by moving the pantograph using the Jog keys.
*The area for the Sub-Soft Limit cannot be larger than the Soft Limit Area set in the Machine
Condition Parameters (MC).
1) Press the Design Edit Key, and select a design
2) Press the B-key .
* Or press the G-key and then the D-key to enter step 5 below
directly for programming Sub-Soft limit settings.
3) Use the Jog keys to select item 14 Frame Type.
4) This feature is off when set to 0. Change value to 1, 2 or 3 to program a Sub-Soft limit.
5) Press the Origin key to open the Sub-Soft limit menu.