TABLE LOOM
FLOOR STAND
A
ssembly
I
nstructIons
Find out more at schachtspindle.com
Schacht Spindle Company 6101 Ben Place Boulder, CO 80301
p. 303.442.3212 f. 303.447.9273
© 2019 Schacht Spindle Company, Inc.
01.19
TL1105TL1106TL1107
Страница 1: ...OOR STAND Assembly Instructions Find out more at schachtspindle com Schacht Spindle Company 6101 Ben Place Boulder CO 80301 p 303 442 3212 f 303 447 9273 2019 Schacht Spindle Company Inc 01 19 TL1105...
Страница 2: ...eg 4 Attach the upper cross brace Place the outside legs with pins facing up on the outer side of the inside legs Insert a barrel nut into each hole of the second cross brace Insert a 1 4 20 x 3 Phill...
Страница 3: ...k to the lock nut attached in Step 5 and tighten it as much as possible 7 Repeat steps 5 and 6 for the other side of the stand and the remaining metal support bar 8 Tighten all the bolts Place the loo...
Страница 4: ...e loom leg Drill each hole to a depth of 3 4 3 The drill guide has an A and a B end Figure 3 For a 4 shaft loom use end A only Figure 4 4 The 8 shaft loom has a larger frame so the holes at the rear o...