![background image](http://html1.mh-extra.com/html/barco/actas-2/actas-2_owners-manual_473881046.webp)
Aligning multiple projectors
4-5
5975636 ACTAS 2 170297
Start Adjust
The reference projector does
not need to be adjusted. How-
ever, it can undergo an ad-
justment in order to be
defocused properly.
Take the Sensor off the ref-
erence projector, and install
it onto the next to be adjusted
projector.
Press the 'Start adjust' com-
mand, the ACTAS Control
unit will display message re-
porting the process :
1. The operator is requested
to enter the address of
the projector to be ad-
justed, there are 3 possi-
bilities :
u
To locate the projec-
tor automatically,
press the
<AD-
DRESS>
key. This will
arm all projectors,
which means that the
projectors will give
their identity to the
ACTAS when any key
on their local control
(e.g. the
keypad
or
RCU
) is pressed.
u
If the proposed ad-
dress is correct, press
the
<ENTER>
key to
confirm.
u
Use the '
ç
' or '
è
' keys
to search the correct
address, then press
the
<ENTER>
key to
confirm.
Press 'ENTER'
Press 'ENTER'
ADDR: to locate proj
whose RCU is hit
ENT:use address 2
çè
: other
/ EXIT
Adjust (mode auto)
using setup nr 6
ENT: Start / EXIT
ENTER : start adjust
çè
: other command
auto mode
Arming proj 100 ...
Hit key on projector
ENT: use address
2
---------#--------R gain=70
---------#--------G gain=63
-----#- 0-----B gain=50
Iterat
1
EXIT: abort
Press 'ADDRESS'
Press the 'ENTER' if the pro-
jector address is right
Use the '
ç
' or '
è
' to select
the correct projector address.
Press the 'ENTER' key to
confirm.
Focus projector
----------------------#-------B
(minimum)
When finished, ENTER
if 'Defocus' on
Defocus projector
--------#----0----------------B
EXIT: skip defocusing
When finished, ENTER
These menus will not be
displayed if the option
'Defocus' is set to 'off'. For
adjusting projectors with
high resolution data dis-
play, skip these steps.
Press 'ENTER'
Color adjusted
in 4 iterations
ENTER : again / EXIT
Press 'ENTER'
2. As soon as the projector address is located, the
automatic adjustment will proceed. 3 bar scales with
the measured values and the cut-off or gain values
will be displayed for monitoring the automatic adjust-
ment process. An automatic adjustment takes about
4 iterations. If the
<EXIT>
key is pressed, the pro-
cess will be aborted.
3. For projectors with electrostatic focus, if the option
'Defocus' is 'On', a message will prompt for defocus-
ing : turn the focus potentiometer until the bar scale
indicator reaches its minimum value. Then the
'Defocus projector' menu will follow : turn the focus
potentiometer clockwise until the '#' reaches '0'.
4. The end of the adjustment process will be reported
by the end message.
Note :
The method to locate the projector automatically through
the use of the
<ADDRESS>
key may not yet be
applicable to older projector types.