![background image](http://html1.mh-extra.com/html/barco/actas-2/actas-2_owners-manual_473881038.webp)
ACTAS software
2-25
5975636 ACTAS 2 170297
The 'Stand-by/operate' mode
This function puts the selected projector or the whole
configuration into or out of the 'Operate' mode.
Note : The 'Operate' mode of the projector is not simply
toggled, but forced into the desired state.
<<<REMOTE CONTROL>>>
ENT: stdby / operate
çè
: other function
EXIT
Press 'ENTER'
è
: proj 6 operat.
ç
: proj 6 standby
é
: all operational
ê
: all standby / EXIT
Press '
è
' to put the projector 6 into the
operational mode. Press '
ç
' to put the
projector 6 out of the operational mode.
Press '
é
' to put all projectors into the
operational mode.
Press '
ê
' to put all projectors out of the
operational mode.
Press 'EXIT' to quit.
<<<REMOTE CONTROL>>>
ENT: contr & bright
çè
: other function
EXIT
Press 'ENTER'
è
: inc brightness
ç
: dec brightness
é
: inc contrast
ê
: dec contrast / EXIT
Press '
è
' to increment the brightness.
Press '
ç
' to decrement the brightness.
Press '
é
' to increment the contrast.
Press '
ê
' to decrement the contrast.
Press 'EXIT' to quit.
The 'Contrast & brightness' mode
With this function being set, the brightness & contrast of
the addressed projector can be incremented or
decremented using the button keys on the ACTAS
Control Unit just as performed by using control keys on
a Remote Control Unit.
Note: If the 'Text' mode of the projector is switched on,
the bar scales will be displayed during adjust-
ments. Please refer to your owner's manual of the
projector for details.