![background image](http://html1.mh-extra.com/html/barco/actas-2/actas-2_owners-manual_473881028.webp)
ACTAS software
2-15
5975636 ACTAS 2 170297
To enter the coordinates in the phosphor 'Custom'
mode :
u
Press the
<ADJUST>
key to enter the edit mode in the
phosphor coordinate menu.
u
Use the '
é
' and '
ê
' keys to select the higher and lower
value comparing with the underlined value.
u
Use the '
ç
' and '
è
' keys to move the cursor left or
right to underline the digit needed to be changed.
u
Press the
<ENTER>
key to save the changes. A
message will be displayed to report the saving pro-
cess. If the
<EXIT>
key is pressed, the changes will
be discarded. A message will be displayed to report
the reverting process.
An example is given, which set the Red x form .657 to
.567. Use the same method to set the other coordinates.
Edit setup nr 2
Red
y .329
ADJ : edit /
çè
: other
EXIT: quit
Edit setup nr 2
Red
x .567
éê
: change /
çè
: other
ENT: save / EXIT: quit
Press '
é
'
Edit setup nr 2
Red
x .557
éê
: change /
çè
: other
EXIT: quit
Edit setup nr 2
Red
x .657
éê
: change /
çè
: other
EXIT: quit
Edit setup nr 2
Red
x .657
ADJ : edit /
çè
: other
EXIT: quit
Edit setup nr 2
Phosphor custom
ADJ : edit /
çè
: other
EXIT: quit
Press '
è
'
Press '
è
'
Initialization brightness & contrast ON/OFF
If the option 'Init bri & con' is 'ON', the Brightness and
Contrast values are then sent to the projector before
adjusting it.
When a 'Get reference' command is executed, the
ACTAS reads the values from the projector and stores
them under the items 'Brightness' and 'Contrast'. The
values can be altered by the user if needed.
To switch the 'Initialization' ON/OFF:
u
Press the
<ADJUST>
key to enter the edit mode.
u
Use the '
é
' and '
ê
' keys to toggle between "ON" and
"OFF".
u
Press the
<ENTER>
key to save the change. A
message will be displayed to report the saving pro-
cess. If the
<EXIT>
key is pressed, the changes will
be discarded. A message will be displayed to report
the reverting process.
Press 'ADJUST'
Edit setup nr 2
Green x .301
ADJ : edit /
çè
: other
EXIT: quit
Press '
è
'
Press '
è
'
Edit setup nr 2
Green y .594
ADJ : edit /
çè
: other
EXIT: quit
Press '
è
'
Press '
ê
'
Edit setup nr 2
Red
x .567
saving ...
Press 'Enter'
Edit setup nr 2
Blue
x .060
ADJ : edit /
çè
: other
EXIT: quit
Press '
è
'
Edit setup nr 2
Blue
y .329
ADJ : edit /
çè
: other
EXIT: quit
Edit setup nr 2
Red
x .567
éê
: change /
çè
: other
EXIT: quit
Edit setup nr 2
Init bri & con on
éê
: change /
çè
: other
EXIT: quit
Edit setup nr 2
Init bri & con off
éê
: change /
çè
: other
ENT: save / EXIT: quit
Press 'ADJUST'
Press '
ê
'
Edit setup nr 2
Init bri & con off
éê
: change /
çè
: other
EXIT: quit
Press 'EXIT'
Press 'ENTER'
ENTER : select/edit
setup
çè
: other command
Edit setup nr 2
Init bri & con on
ADJ : edit /
çè
: other
EXIT: quit