Bante Instruments Bante900P, Инструкция по эксплуатации

Страница: 42 / 47

BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER 41
Specifications
MODEL BANTE900P
pH
Range -2.000~20.000pH
Accuracy 0.002pH
Resolution 0.1, 0.01, 0.001pH
Calibration Points 1 to 5 points, USA, NIST, DIN Standards
Temperature Compensation 0~100°C, 32~212°F, Manual or Automatic
mV
Range -1999.9~1999.9mV
Accuracy ±0.2mV
Resolution 0.1, 1mV
Calibration Points 1 point (Only for Relative mV mode)
Calibration Range ±200mV
Ion
Range 0.001~19999ppm, mg/L, mol/L (Depending on range of Ion Selective Electrode)
Accuracy ±0.5% F.S (Monovalent), ±1% F.S (Divalent)
Resolution 0.001, 0.01, 0.1, 1
Calibration Points 2 to 5 points
Calibration Solutions 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L
Conductivity
Range 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy ±0.5% F.S
Calibration Points 1 to 5 points
Calibration Solutions 10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm
Temperature Compensation 0~100°C, 32~212°F, Manual or Automatic
Temperature Coefficient 0.0~10.0%/°C
Compensation Modes Linear or Pure Water
Cell Constant K=0.1, 1, 10
Normalization Temperature 20 or 25°C
TDS
Range 0~10ppt (Max. 20ppt, depending on factor setting)
Accuracy ±1% F.S
TDS Factor 0.1~1.0 (Default 0.5)