BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER
12
MANUAL TEMPERATURE COMPENSATION:
1. DO NOT connect the temperature probe to meter.
2. Press and hold the
o
C key for 3 seconds to enter temperature setting mode.
3. Press
or
key to set the temperature value of sample.
4. Press ENTER key to confirm, the meter returns to measurement mode. Setting is completed.
In the temperature setting mode, press
or
key once, the setting value will increase or decrease by 0.1. Press and hold the
or
key, the setting value will increase or decrease by 1.
NOTE:
In the Dissolved Oxygen mode, DO NOT connect the temperature probe to meter. The DO probe has a built-in temperature sensor.
