BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER
26
Calibration Report
This program lets you check the calibration factor of the conductivity electrode.
1. Press MR key in the conductivity measurement mode, the
meter shows “LOC”.
2. Press
or
key until the display shows “ELE” (Electrode Diagnosis).
3. Press ENTER key to confirm, the meter shows the last calibration date (Format: mm-dd).
4. Press
key, the meter shows calibration point and calibration factor (e.g. K=0.998).
5. After the browsing, press MEAS key, the meter returns to measurement mode.
MR
MR
MR
……
.Calibration Point
...
…
.Calibration factor
Enter
