B&R 8I84T200037.01P-1, Руководство пользователя

Страница: 325 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 325
[PARAM. BAR SELECT]
Name/Description
[PARAM. BAR SELECT]
[Alarm groups]
[Frequency ref.]
[Ref. Torq.]
[Output frequency]
[I motor]
Mean Speed ENA]
[Speed]
[Motor voltage]
[Motor power]
[Motor torque]
[Mains voltage]
[Drv.thermal state]
[Drv.thermal state]
[Th. brake val. state]
[Consumption]
[Run time]
[Elapsed time]
[IGBT alarm counter]
[PID speed ref.]
[PID feedback]
[PID error]
[PID Output]
[Config. active]
[act. parameter set]
In Hz: Parameter displayed in the factory settings.
As %
In Hz
In A: Parameter displayed in the factory settings.
In Hz
In rpm
In V
In W
As %
In V
As %
As %
As %
In watt hours (Wh) or kilowatt hours (kWh) according to the inverter type
In hours (motor duty cycle)
In hours (motor duty cycle)
In seconds (accumulated time of the overtemperature alarms)
As %
As %
As %
In Hz
CNFO, 1 or 2
SET1, 2 or 3
The parameter is selected using ENT (a tick then appears next to the parameter) or deselected. 1 or 2 parameters can be selected.
Example:
HEADER SELECTION
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
MONITORING