B&R 8I84T200037.01P-1, Руководство пользователя

Страница: 242 / 405

Programming guidelines
242 ACOPOSinverter P84 User's Manual 2.10
[PRESET PID REF] (PrI-)
Code Name/Description Factory settings
Pr1- [PRESET PID REF]
The function is accessible if [PID feedback] (PIF) is assigned.
Pr2 [Assign 2 PID ref.] [No] (nO)
nO [No] (nO) : Function not active
LI1 [LI1] (LI1)
- .
[...] (...) : See the assignment conditions
In state 0 of the input or the assigned bit, the function is not active.
In state 1 of the input or the assigned bit, the function is active.
Pr4 [Assign 4 PID ref.] [No] (nO)
Make sure that [assign 2 PID ref] (Pr2) has been assigned before you assign this function.
nO [No] (nO) : Function not active
LI1 [LI1] (LI1)
- .
[...] (...) : See the assignment conditions
In state 0 of the input or the assigned bit, the function is not active.
In state 1 of the input or the assigned bit, the function is active.
rP2 [Preset ref. PID 2]
1)
300
The parameter is accessible when [assign 2 PID ref] (Pr2) is assigned.
Setting range from
[min PID ref]
(PIP1) to
[max Ref. PID]
(PIF2)
2)
.
rP3 [Preset ref. PID 3]
1)
600
The parameter is accessible when [assign 4 PID ref] (Pr4) is assigned.
Setting range from [min PID ref] (PIP1) to [max Ref. PID] (PIF2)
2)
.
rP4 [Preset ref. PID 4]
1)
900
The parameter is accessible when [assign 4 PID ref] (Pr4) is assigned.
Setting range from [min PID ref] (PIP1) to [max Ref. PID] (PIF2)
2)
.
1) This parameter can also be accessed via the [SETTINGS] (SEt-) menu.
2) If there is no graphic display terminal, then on the four-digit display the values over 9999 are shown with one point after the thousands unit. For example,
15.65 for 15650.
Parameter that can be modified during operation or when stopped.