B&R 8I84T200037.01P-1, Руководство пользователя

Страница: 123 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 123
2.8.5 [SIMPLE START](SIM-)
2.8.5.1 With graphic display terminal:
RDY
Term +0.00 Hz 0 A
1 DRIVE MENU
Code Quick
1.1 SIMPLE START MENU
1.2 MONITORING
1.3 SETTINGS
1.4 DRIVE DATA
1.5 INPUTS/OUTPUTS
<< <<
RUN
Term +50.00 Hz 80 A
1.2 MONITORING
Code Quick
IMAGE I/O
COMM MAP.
Alarm groups :
Freq. reference value HMI :
<< <<
ENT
ENT
Englisch
RDY
Term +0.00 Hz 0 A
MAIN MENU
Code Quick
1 DRIVE MENU
2 ACCESS LEVEL
3 OPEN / SAVE AS
4 PASSWORD
5 LANGUAGE
2.8.5.2 With integrated display terminal:
Switch on
Display the status of the inverter
SIMPLY START
The menu [SIMPLE START] (SIM) can be used for a quick start, which is sufficient for the majority of applications.
The parameters in this menu can only be changed if the inverter is stopped and no run command is present, with
the following exceptions:
• Autotuning, which starts the motor.
•
The setting parameters, see "Parameters that can be modified during operation or when the motor is
stopped." on page 130
Note:
The parameters of the menu [SIMPLE START] (SIM) must be entered in the displayed order, as the later
ones depend on the former.
For example,
[2/3 wire control] (tCC) must be configured before all other parameters.
The [SIMPLE START] (SIM) should be configured by itself or before other menus for configuration of the inverter.
If a change has been made on one of these menu settings, in particular to [DRIVE DATA] (DRC) , parameters
in [SIMPLE START] (SIM) can be changed. After changing another menu for configuring the inverter, it is not
required, but not harmful, to return to [SIMPLY START MENU] (SIM-) . So as not to unnecessarily complicate this
section, the changes resulting from entries in other configuration menus will not be described here.